RejeX

The Soil Barrier and Anti-Stain Protection

rejex group

SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, AIRPLANE & MOTORCYCLE

RejeX is a thin-film polymer coating designed to provide a high-release surface, this very thin film – less than a micron thick – reduces the adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, dust, etc, that can leave stains. It also makes graffiti easy to remove and can be applied to windshields to repel rain. It’s easy to apply and produces a deep shine that lasts for months.

Developed in response to the U.S. military’s need for a high tech, dirt and stain repelling coating to protect paint from the ravages of harsh chemicals and jet exhaust, RejeX provides incomparable protection and shine for vehicles of all kinds including: cars and trucks, boats, yachts, military and commercial ships, airplanes and helicopters, motorcycles, RVs, busses, tractors and industrial vehicles. RejeX is also very popular for use on furniture and as a protective sealant for stone counters, shower stalls and glass windows and doors.

NOTHING STICKS BUT THE SHINE!®

It also makes graffiti easy to remove and can be applied to windshields to repel rain. It’s easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting.

HOW REJEX WORKS

RejeX should be applied to a cool (between 10° and 25° C) dry surface that’s out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it won’t perform up to its potential. RejeX is wiped on, allowed to dry to a haze, wiped off, then allowed to cure for 12 hours.

Curing is required to allow the ‘monomers’ (polymer building blocks) that make RejeX to attach themselves to the surface being treated and to polymerize (crosslink) into a water-clear, impervious film. It is very important to allow RejeX to cure for 12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners etc. before its cured, the contaminants will interfere with the film, preventing the RejeX film from achieving maximum performance.

PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES

RejeX is not meant to be used on porous surfaces, highly oxidised painted surfaces or to fill fine scratches. RejeX can be applied in multiple coats, allowing 8 hour curing time between coats for deeper colour and greater depth of gloss. RejeX has a higher ‘refractive index’ than waxes, so it produces richer, deeper looking colour and a lustrous long-lasting finish.

RejeX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax comes off comparatively quickly. There’s no reason to wax over RejeX. As we’ve already said, RejeX leaves a shinier, longer lasting finish than wax…and the wax can’t adhere well to RejeX!

If a RejeX treated surface needs re-painting, normal paint preparation is all that is required. Abrasive cleaners, polishes, rubbing compounds or chemical paint stripper will remove the RejeX film.

WHAT MAKES A REJEX PROTECTED VEHICLE EASIER TO CLEAN?

RejeX leaves a film coating that’s so non-porous and is such a slick, high-release surface that most contaminants can’t penetrate or adhere to it. Certainly the acids in bug splats (especially love bugs), bird droppings, tree sap, exhaust deposits, brake dust and other common contaminants aren’t able to stick to RejeX much less penetrate RejeX’s protective film. While these contaminants will still get on your car, since they can’t stick, cleaning them off is much easier.

INSTRUCTIONS

  1. Shake well and apply to a cool surface with a clean, dry cloth.
  2. After RejeX dries to a haze (like a wax), simply wipe it off. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX easily wipes on and off.
  3. Allow RejeX to cure for 12 hours out of the elements.
  4. For optimum protection, reapply every 4-6 months as needed.
 
RejeX should be used instead of wax to protect boats from exposure to the elements. RejeX provides the best protection available to gel coat and marine paint surfaces all while providing an incomparable, brilliant, long-lasting, deep shine. 

RejeX - This is pretty cool stuff and I highly recommend it. I'm always amazed when one of the smaller companies trumps the big guys, and this is a classic example. I have no idea how they did it, but Corrosion Technologies has come up with a winner!

RejeX - Developed in response to the U.S. military's need for a high tech, dirt and stain repelling coating to protect paint from the ravages of harsh chemicals and jet exhaust, RejeX provides incomparable protection and shine for vehicles of all kinds.